BRONZE GLOBE VALVES

Rushash Engineering Co. Ltd.

Manufacturers of Bronze Globe Valves



Bronze Globe Valves
( WHEEL VALVES )

Material of Construction :

a) Body & Cap : Bronze confirming to IS 318 Gr. 2.

b) Spindle, Gland & Gland Nut : Extruded Brass bar confirming to IS 319

for sizes and other details Please visit rushasvalves.com

Bronze Gate Valves

Rushash Engineering Co. Ltd.

Manufacturers of Bronze Gate Valves


Screwed End Valves
As Per IS 778 Class I / Class II

Material Of Construction :

a) Body, Cap & Gate : Bronze confirming to IS 318 Gr.2.

b) Spindle : Extruded Brass bar confirming to IS 319.

c) Gland & Gland Nut : Brass / Bronze

Flanged End Valves

Working Pressure :

10.5 Kg/Cm2 Cold Non Shock

Testingpressure21Kg/Cm2hydraulic.

Flanged end valves have Flangesas per B. S. 10 Table D.

Valves are ordinarily supplied with undrilled flanges. However, valves with drilled flanges, can also be supplied if details are given while ordering

for sizes and other details Please visit rushasvalves.com

FLUSH BALL VALVES

SUDHARSHAN ENGINEERING WORKS

Manufacturers of Flush Ball Valves

Flush Ball Valves

Flush Ball Valves are of Soft Seated Floating Ball.

One of the the most important component in any Ball valves is the Ball itself.

The Ball is accurately machined to mirror finish

the exact sphericity so as to ensure low operating forque

and high pressure holding capacity and

thus increasing life of the valve.

M.O.C. : SS304, SS 316, WCB

Get Quotation

for Details Please Visit sudharshanvalves

FLUSH BOTTOM TANK VALVES

SUDHARSHAN ENGINEERING WORKS

Manufacturers of Flush Bottom Tank Valves



Flush Bottom Tank Valves

Size 25mm to 200 mm

To Suit your Tank Bottom Nozzle Confirms to DIN STANDARD

M.O.C. : SS304, SS316, WCB

SPECIAL FEATURES :

Our products have many distinctive features :

1. Standard designing.

2. Well tested materials are used.

3. All testing facilities available.

According to the liquid (chemicals) quality material are used.

Get Quotation

for Details Please Visit sudharshanvalves

THREE WAY AND FOUR WAY BALL VALVES

SUDHARSHAN ENGINEERING WORKS

Manufacturers of Three way and Four way Ball Valves


Three way and Four way Ball Valves

"T" port & "L" port

size 15mm to 100 mm

Suitable to use in Duplex Strainer

flow control in desired direction

M.O.C. : SS304, SS316, WCB

MATERIALS AVAILABLE FOR :

1. S.S. 304, S.S. 316, Fabricated Ball Valves.

2. CF8, CF8m, W.C.B. investment casting in 2 piece, 3 piece, ball valves.

3. Cast iron ball valves, 2 piece & 3 piece available.

Get Quotation

for Details Please Visit sudharshanvalves

BALL VALVES

SUDHARSHAN ENGINEERING WORKS


Manufacturers of Ball Valves




Ball Valves

"SEW" Ball valves are of soft seated, Floating Ball. Three piece design available in both regular port & full port patterns. Ball is seat supported and quarter turn rotates the ball from full open to full close position.

The Stem Flange, on entire part of the stem, prevents the stem from blowing out pressure within the body cavity. This feature also allows replacement of stem packing while the valve is under pressure.

One of the most important component in any Ball valve is the Ball itself. The Ball is accurately machined to mirror finish and the exact sphericity so as to ensure low operating forque and high pressure holding capacity and thus increasing life the valve.

Get Quotation

for Details Please Visit sudharshanvalves